LABCENTER PCB II / ARES TOOL INFORMATION FILE
=============================================

Tool set up for C:\CADPAK\ULTRASA3.LYT

File List
---------
C:\CADPAK\ULTRASA3.C1                   Component Side Copper
C:\CADPAK\ULTRASA3.C10                  Solder Side Copper
C:\CADPAK\ULTRASA3.DRL                  Excellon Drill Data

Photoplotter Setup
------------------
Format: ASCII, 2.3, imperial, absolute, eob=*, LZO
Notes:  All sizes in thou. D=Diam, S=Side, W=Width, H=Height

D10	CIRCLE	D=100		FLASH
D11	CIRCLE	D=150		FLASH
D12	SQUARE	S=60		FLASH
D13	DIL	W=100	H=60	FLASH
D14	CIRCLE	D=80		FLASH
D15	CIRCLE	D=60		FLASH
D16	CIRCLE	D=15		DRAW
D17	CIRCLE	D=10		DRAW

NC Drill Setup
--------------
Format: ASCII, 2.3, imperial, absolute, eob=<CR><LF>, no zero suppression.
Notes:  Tool sizes in thou.

T01	30
T02	25